Tag it. Tap it. Manage it.

A Property Tag is planned as the front door to a property’s digital record. This page walks through the planned tap, who would see what, and how the record is designed to carry on through a property’s life.

Planned features. This page describes what Property Tag is designed to do once it’s built. Open questions are listed at the end of this page. Screens are illustrations using example data.

The three steps

  1. Tag the property

    A tag is fixed somewhere practical at the property and linked to that one property’s record. It carries both NFC and a QR code. You then add the basics, key information and the documents you already have.

  2. Tap or scan

    Hold an NFC-enabled phone against the tag, or scan the QR code with any phone camera. The record is designed to open in the browser, showing what your role allows.

  3. Manage the record

    Add work and documents, track upcoming jobs and report issues. The record builds up over time into a history of the property.

What happens after a tap

The tag doesn’t contain the record. It points to the property’s page, so the record can grow without the tag changing.

  1. 1

    Tap or scan

    Hold an NFC-enabled phone against the tag, or scan its QR code with the camera.

  2. 2

    The property’s page opens

    The tag points to a web address for that one property. It opens in your phone’s browser, with no app to download.

  3. 3

    You see what your role allows

    An owner sees the full record; a tenant sees issue reporting and the information shared with them. Role-based access is a core design goal.

  4. 4

    Do the job, then leave

    Look something up, report an issue or log completed work. It’s added to the record before you walk away.

NFC: tap and go

Hold an NFC-enabled phone against the tag. Most recent smartphones can read NFC tags. We’ll publish a compatibility guide before launch.

QR code: the fallback

Each tag is intended to carry a QR code too, so phones without NFC, or with it switched off, can scan it with the camera and reach the same page.

No app to download

Property Tag is being built as a web app. Owners, tenants and contractors all use it through the phone’s browser, so there’s nothing to install before a repair.

Role-based views: the same tag, different people

A tenant reporting a leak and a buyer looking at a summary shouldn’t see the same thing. Property Tag is designed so what you see and can do depends on your role.

What each role is planned to be able to see and do after tapping a Property Tag
RolePlanned view after a tapPlanned actions
HomeownerThe full House Passport for their propertyAdd work, upload documents, set reminders, share or hand over the record
Landlord / managerThe record for each property they manage, plus a portfolio viewAdd work and documents, review issue reports, assign and follow up jobs
TenantThe information shared with them, such as key household detailsReport a problem with photos and urgency, and follow its status
ContractorThe history relevant to the job they’ve been given access forLog completed work, attach photos and certificates, add notes
Prospective buyerA summary the owner has chosen to shareView only

Planned behaviour. The detailed access rules are still being finalised (see the FAQs).

The tag itself: placement, damage and replacement

Where it goes

Somewhere practical and easy to reach for the people who need it: inside the boiler or utility cupboard, beside the consumer unit, or just inside the front door. A landlord might choose the spot a tenant would naturally look.

We’ll include placement guidance with each tag.

If it’s damaged or lost

The record belongs to the property, not to the physical tag, so a damaged tag shouldn’t mean a lost record. The QR code offers a second route in.

The replacement process and cost will be confirmed before tags go on sale.

If the property changes hands

The tag stays with the property. When the record is handed over, the new owner taps the same tag and carries on from the existing history.

The property lifecycle

From setup to the next owner

How a record is designed to move through six stages of a property’s life.

  1. Stage 1

    Set up

    Register the property, link the tag and add the basics.

    An owner adds the address, key details, emergency information and the documents they already have, such as the boiler manual and last certificate.

  2. Stage 2

    Add work

    Log jobs as they happen, with the paperwork attached.

    After a service or repair, the work is added with the invoice, photos and a next-due date. The history builds up a job at a time.

  3. Stage 3

    Resolve issues

    Report, assign, fix and close, all on the record.

    A tenant reports a leak with photos. The landlord sees it, a contractor is sent, the fix is logged and the issue closes, and stays in the history.

  4. Stage 4

    Change tenant

    The record stays; access changes.

    The outgoing tenant’s access is designed to end and the new tenant starts with the household information and the issue-reporting flow.

  5. Stage 5

    Sell

    Prepare what a buyer can see.

    The owner chooses which parts of the history to share, such as certificates, warranties and major work, with a prospective buyer or their solicitor.

  6. Stage 6

    Hand over

    The next owner continues the record.

    Ownership of the record is designed to transfer with the property, so the new owner starts with the history instead of a blank page.

Walkthrough

A repair, from report to record

How one issue could move through the system, from a tenant’s tap to the property’s history.

  1. 1Tenant: taps the tag, picks Heating, describes “no hot water”, adds two photos and marks it urgent.
  2. 2Landlord: is notified, sees the photos and the boiler’s service history on the same screen, and assigns a heating engineer.
  3. 3Engineer: is given access for the job, taps the tag on arrival and sees the boiler details and the previous visit’s note.
  4. 4Engineer: fixes the fault and logs the work, photos and a note before leaving.
  5. 5Everyone: sees the status move to resolved. The job is now part of the property’s history.

What Property Tag is, and isn’t

What Property Tag is

  • A digital record for one property, called the House Passport.
  • Opened by tapping an NFC tag or scanning a QR code fixed at the property.
  • A place for maintenance history, documents, certificates, warranties, inspections and key information.
  • Designed to stay with the property through changes of tenant and owner.

What it is not

  • Not a survey, valuation or home report.
  • Not a legal certificate, and it doesn’t replace any legal obligation. It can store copies of certificates you hold.
  • Not a guarantee of a property’s condition. A record is only as complete as the information added to it.
  • Not a replacement for professional advice from a surveyor, solicitor, engineer or electrician.

What’s still being worked out

The intended experience above is what we’re building towards. These are the parts we haven’t finished.

Still being designed

These are the product questions we’re working through, and we’d rather say so than guess:

  • Exactly who can see and edit what, and how sharing with a buyer works
  • How a record is handed over when a property is sold or let on
  • How work logged by contractors is checked or verified
  • Replacement tags if one is lost or damaged
  • Data export, retention and deletion

Before launch we’ll publish

  • A plain-language explanation of security and privacy
  • A full privacy notice and terms of use
  • Pricing, and what it includes
  • Where tags are available first

Until then we make no security, compliance or accreditation claims on this website.

Want one for your property?

Property Tag is coming soon, with no launch date yet. See where it’s up to, and what’s still to be decided.