Records are scattered
Invoices in drawers, certificates in email attachments, photos on someone’s phone, a tradesperson’s number on a sticky note. Even a diligent owner ends up with five places to look.
Property Tag is being built to link your property to a digital record of its maintenance, documents, certificates and important information, all in one place. The plan: tap the tag or scan the code to open it, and the record stays with the property when ownership or tenancy changes.
Coming soon, with no launch date yet.
What goes into a record
A property is looked after by many people over many years: owners, tenants, landlords, agents and tradespeople. Almost nothing connects what each of them knew. So the history of a building ends up in drawers, inboxes and memories, and disappears when people move on.
Most property problems are made worse by missing information, not just by the fault itself. A continuous record means the answer to “what do we know about this?” stays with the building, however many owners, tenants and contractors it has between now and then.
Invoices in drawers, certificates in email attachments, photos on someone’s phone, a tradesperson’s number on a sticky note. Even a diligent owner ends up with five places to look.
A warranty is only useful if you can find it, and know it exists, when something fails. Certificates are often needed at exactly the point they can’t be found.
Owners move, tenants change, managers hand over portfolios and contractors retire. What they knew about the property usually goes with them.
“When was the boiler last serviced?” becomes a round of emails to agents, contractors and tenants, repeated for every property and every inspection.
Is it the agent, the landlord or a repairs line? Reports get lost in texts and calls, with no photo, no date and no record that anyone was told.
A sale is when a property’s history matters most, and it’s usually reconstructed from whatever the seller can find. Buyers can’t see what they don’t know to ask about.
| When you need… | Today, it often means… | With a Property Tag, it’s designed to mean… |
|---|---|---|
| A certificate or warranty | Searching drawers, inboxes and old folders | Open the record, find it under the relevant category |
| The service history | Ringing round, or guessing | A dated timeline with the engineer’s notes and documents |
| To report a problem | Texts, calls and “did you get my message?” | Tap the tag, pick a category, add photos and a description |
| To brief a contractor | Explaining the property from scratch each visit | They see the relevant history before they arrive |
| To hand a property on | A folder of whatever could be found | The record moves with the property |
A clear boundary up front: Property Tag organises and shares a property’s records. It doesn’t assess, certify or guarantee anything.
No complicated set-up. The tag is the front door to the record.
A Property Tag is fixed somewhere practical at the property, such as the boiler cupboard or beside the front door, and linked to that property’s record.
Tap an NFC phone on the tag, or scan the QR code. The record opens in the phone’s browser, with no app to download.
Add work, upload documents, track upcoming jobs and report issues, depending on your role.
Hold an NFC-enabled phone against the tag, or scan its QR code with the camera.
The tag points to a web address for that one property. It opens in your phone’s browser, with no app to download.
An owner sees the full record; a tenant sees issue reporting and the information shared with them. Role-based access is a core design goal.
Look something up, report an issue or log completed work. It’s added to the record before you walk away.
Illustrations of planned features, using example data. The product is still in development, so details may change.
The record is built around the things people actually lose: the invoice, the warranty, the manual, the note about where the stopcock is.
Every service, repair and improvement, dated and categorised: heating, electrical, plumbing, roofing, windows and doors.
The paperwork behind each job, attached to that job, so you can see what was done and what it cost.
Before-and-after photos of work, the condition of a roof or loft, or the location of a hidden valve.
Copies of certificates and reports you hold, such as gas, electrical and energy documents, filed with the work they relate to.
What’s covered, by whom, and until when, with the proof of purchase alongside.
Make, model, install date and serial number for the boiler, hob, extractor fan, consumer unit and more.
Past inspection reports and a list of what’s due next: annual servicing, roof checks, gutter clearance.
The manual for the heating controls, the alarm panel or the smart thermostat, instead of the one that vanished in 2019.
Where the stopcock, gas shut-off and fuse board are, and who to call, so anyone at the property can act quickly.
What the engineer found, what they recommend next time, and which trades have worked on the property.
From the day a property is set up, through repairs, tenancies and a sale, to the next owner. This is how the record is designed to carry on.
Register the property, link the tag and add the basics.
Log jobs as they happen, with the paperwork attached.
Report, assign, fix and close, all on the record.
The record stays; access changes.
Prepare what a buyer can see.
The next owner continues the record.
Different people need different things from the same record. Each gets a view and a set of actions suited to their role.
Certificates, invoices, warranties and service history together, ready to hand to the next owner.
Example: the boiler engineer arrives, you tap the tag, and they log today’s service before they leave.
Property Tag for homeowners For landlords & property managersMaintenance, documents and tenant issue reports across a portfolio, in one view.
Example: before inspections, you open the portfolio view and see which properties have work due and which have open issues.
Property Tag for landlordsTap the tag, add photos, say how urgent it is and follow the status.
Example: no hot water on a Tuesday morning, reported in a minute with photos.
Tenants For contractorsSee the relevant history, then record what you did, with evidence.
Example: an engineer sees the boiler’s last service and a note from the previous visit.
Contractors For developersGive every new home its manuals, warranties and certificates in one place.
Example: twelve homes completed, twelve organised handover records.
Developers For prospective buyersView the summary an owner chooses to share before you commit.
Example: windows replaced in 2021 with a guarantee attached.
BuyersProperty Tag won’t fix a boiler. It removes the searching, chasing and rebuilding that surround every repair, inspection and sale.
The House Passport is the property’s timeline: work done, documents attached, inspections and upcoming jobs, in date order, with filters by category.
We aren’t quoting prices yet, and nothing can be bought.
Property Tag is coming soon. Everything described on this site is planned. Here, in one place, is what we haven’t finished.
These are the product questions we’re working through, and we’d rather say so than guess:
Not answered here? The status page shows what’s still to be decided.
Property Tag is being built as a digital record for a property, opened by tapping or scanning a small tag fixed at the property. The record, which we call the House Passport, is planned to bring together maintenance history, documents, certificates, warranties, inspections and key information in one place, and to stay with the property as ownership or tenancy changes. It’s coming soon and isn’t available yet.
Not yet. Property Tag is coming soon. It’s still in development, there’s no launch date, and there’s nothing to buy or sign in to. See the status and roadmap for where things are up to.
The plan is that you tap an NFC-enabled phone against the tag, or scan its QR code with the camera, and the property’s page opens in your phone’s browser, showing what your role allows. More on what is planned after a tap.
Most recent smartphones can read NFC tags, and the QR code works on any phone with a camera. We’ll publish a plain compatibility guide before launch so you can check your own phone.
The record is designed to stay with the property. The seller can choose what a prospective buyer sees, and at completion the record is designed to transfer to the new owner, whose history continues from there. The detailed transfer process is still being designed.
We’re not making security or data-protection claims on this website. The product isn’t live and its security and privacy approach is still being finalised. Our Security & Privacy page sets out what we intend to build, with each item marked as planned, being designed or required before launch, and we’ll publish a full privacy notice before launch.
Pricing is to be announced. We aren’t quoting any prices yet. We’ll publish pricing before anything goes on sale.
No. It’s a place to keep and share your records. It doesn’t replace any legal obligation, certificate, survey or professional advice, and it doesn’t guarantee the condition of a property.
Property Tag is coming soon, with no launch date. See where it’s up to, what’s planned and what’s still to be decided.